Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Battery Replacement

Removal Procedure
  1. Open the hood.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.


  3. Remove the battery retainer bolt (1) and the battery retainer (2).

  4. Loosen the battery positive cable junction bolt (1).
  5. Remove the battery positive cable with the junction block (2) from the battery.
  6. Remove the battery (3) from the battery tray floor.
Installation Procedure

    Install the battery (3) to the battery tray floor..
  1. Install the battery (3) to the battery tray floor..
  2. Install the battery positive cable with junction block (2) to the battery (3).

  3. Install the battery retainer (2).
  4. Caution:

    Refer to Fastener Caution.

  5. Tighten the battery retainer bolt (1) to 22 Y (16 lb ft)

    .

  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
Battery Positive and Negative Cable Replacement
Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the fuse block and battery positive cable cover. ...

Communication Interface Module Battery Replacement
Communication Interface Module Battery Replacement Callout Component Name Preliminary Procedure Remove the instrument panel low ...

Other materials:

Parking Brake Adjustment (Drum Brake)
Note: The park brake cable adjusting nut is a nylon lock type. Use ONLY HAND TOOLS whenever tightening or loosening the adjusting nut. Apply and fully release the park brake several times. Verify that the park brake lever releases completely. Turn ON the ignition. Verify the red B ...

Charge Air Cooler Outlet Air Hose Replacement
Removal Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement. Loosen the clamp (1) at the charge air cooler outlet pipe (2) to throttle body (3). Disconnect the intake air pressure and temperature sensor harness connect ...

Drive Range, Fifth Gear (Gen 2)
As vehicle speed increases, the transmission control module (TCM) processes input signals from the automatic transmission input and output speed sensors, the throttle position sensor and other vehicle sensors to determine the precise moment to command ON the normally-low 35R pressure control s ...

В© 2014-2025 Copyright www.csmans.com
 
0.0085